Trumark Slingshot Catapult Power Bands RR-1 RR-2 RR-T

SKU
TRURP_MASTER
In stock
From £4.99

Order before 1pm (Mon - Fri) for Same Day Dispatch* - Click here for delivery info.

TRUMARK POWERBAND

In the early fifties Trumark was the first to use HIGH-QUALITY surgical latex-tubing as powerbands on slingshot frames made from round metal rods. With a small amount of alcohol the bands can be installed on the slingshot very quickly without the use of tools, strings, or glue. Both bands are cut from ONE LENGTH OF TUBING so that they are "matched" for tournament shooting . Trumark powerbands are PACKAGED STRAIGHT in a sealed air-tight card to prevent deterioration before installation.

Three Models Available - Please Make Your Selection Above:

  • RR-1 - Normal Pull Powerband (Yellow)
  • RR-2 - Heavy Pull Powerband (Black)
  • RR-T - Tapered Powerband (Red). Trumark's TAPERED POWERBANDS Improve the operating efficiency of your slingshot with "EZPULL" tapered powerbands. Designed to release maximum energy with minimum strain while aiming. These bands are 15 to 35% more efficient than conventional non-tapered bands, and are excellent for tournament shooting where faster ammo velocity and accuracy helps to increase your Bulls-Eye scores!

Fitment - The easiest way to fit is to use a small amount of Isopropyl Alchocol to help slide the bands on to the forks - this is readily available online.

Compatibility - All models will suit all Tru Mark slingshots, they also suit the complete Barnett Range, if fitting to a Banrett model you need to retain the two black plastic fork protectors that are fitted to Barnett models (not supplied with these bands).

USA Flag Graphic All Trumark products are made in the USA to the highest standards - we aim to stock the complete range of Trumark products.

Trumark image

COLUMBUS, NEBRASKA USA: Shown above is the first wrist-braced slingshot that was invented by Howard Ellenburg and his sons in the winter of 1953. NOTE: Slingshots in Europe and other countries are usually called Catapults or Katapults. Using a few simple tools, Trumark's first prototype slingshot was bent into shape on the bumper of a 1946 Willy's Jeep! A dog-collar was used to strap the brace to the wrist. This proved to be successful. The next version eliminated the collar, and incorporated a continuous metal brace that started at the bottom of the hand and wrapped (locked) over the top of the wrist. A recoil pad was then added to protect the shooter's wrist.

This 2nd version was Trumark's first commercial model and was called Howard’s Wrist-Locker Slingshot. The original production line was set up in an old abandoned beer hall in the little town of Duncan, Nebraska. The first company to distribute "Howard’s Wrist-Lockers," was Dura-Pak Sporting Goods Company in Sioux City, Iowa.

Trumark image 2

The prototype slingshot / catapult (the dog-collar model, in the red circle) was originally invented to shoot snowballs that would penetrate the neighboorhood kids' snowforts, the "enemies", that kept springing up across the street in Norfolk, Nebraska. (This was just a few blocks away from where Johnny Carson grew up!) Since the powerbands had to be strong enough to hurl a small snowball through a big slingshot fork, the wristbrace was created in order to withstand the heavier draw of the bands. To increase the power even more, the square frame was soon changed to a round rod so that surgical tubing could be tried as powerbands.

During that time, Chinese finger-trap tubes (nick-named "handcuffs") were popular at the local carnivals, and the concept behind the traps worked successfully as the way to attach tubing to the slingshot / catapult without strings or glue! Attaching high-powered latex tubing to forks with PRONGS bent backwords towards the shooter was a break through in slingshot technology by Trumark. This new method to attach surgical tubing to the slingshot also lowered the costs of production. At the same time, Trumark also invented the "tube through-the-hole method" to attach the pouch to the tubing. This eliminated the old way of using string to tie the bands to the pouch, and further improved the "look" and reliability of the slingshot / catapult. In later "powerbands" the "tube through-the-hole method" was replaced by a plastic pin to eliminate punching a hole through the tubing near the leather pouch.

Slingshots / catapults manufactured around the world today are still based on the ideas pioneered by Trumark in 1953. Although the original models worked well as wintertime "fort busters", Trumark evolved the slingshot / catapult into models that could be sold throughout the year. Trumark has manufactured millions of slingshots over the last 55 years, and continues to lead the way forward in slingshot design and development.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Returns:

We will happily exchange or refund any item returned unused and unmarked within 14 days of delivery, all items have a 12 month warranty.

Our returns address:
J S Ramsbottom
West House, Bracewell Avenue
POULTON-LE-FYLDE
FY6 8JF

Please note: We are 100% mail order only and have no public access.

*We aim to despatch all orders received before 1 PM the same day (Mon - Fri - Excluding public holidays), delivery charges are based on the total order weight. The cost of delivery is displayed on the checkout page, delivery surcharges may apply to some remote areas - if your order is affected we will contact you.